Schluter 55X55 Kerdi-Shower-LTS Tray Off Center

Features

• Waterproof and ready to tile
• Features integrated KERDI waterproofing
• Prevents mold and mildew growth
• Reduces weight and installation time
• Made of lightweight, expanded polystyrene
• The floor can be sloped on a single plane to KERDI-LINE, which enables the use of large-format tiles and creates interesting design opportunities
• Designed for use with the KERDI-LINE linear drain (sold separately)
• Available in ten configurations with center drain and perimeter drain placements with reduced perimeter heights that simplifies the construction of curbless showers

Installation

• Any leveling of the floor must be done prior to the installation of the shower tray. If necessary, cut the tray to size prior to application. The shower base can also be extended beyond the tray using dry-pack mortar, which is in turn covered with the KERDI membrane.
• Cut the flat end of the KERDI-SHOWER-LT/-LTS tray to fit around the channel support. Apply Schluter SET™, Schluter ALL-SET™, Schluter FAST-SET™, or unmodified thin-set mortar to the substrate using a 1/4" x 3/8" (6 mm x 10 mm) square- or U-notched trowel. Slide the KERDI-SHOWER-LT/-LTS under the edge of the channel body flush with the surface of the channel support, making certain to solidly embed the tray in the mortar. Check the underside of the tray to ensure that full coverage is achieved.