Special equipment and techniques are required when handling and installing large format thin tiles for accuracy, safety, and functionality. The tools you chose will make all the difference if you are looking to be as efficient as possible. These Raimondi large format tile installation tools allow you to cut, handle, and transport large format tiles with ease and comfort, so you can make the most of your time. Here are 10 tools that can make your tile installation project better.

Raimondi Slant Ridge Trowels for Adhesive Application

A fundamental part of tile installation is to properly apply the adhesive before laying down the tiles. An application technique known as “back-buttering” is required for correct application, using a notched trowel. Especially with a slant ridge notched trowel, you can guarantee perfect coverage of the adhesive. These trowels come in various sizes, depending on the spaces and tiles you are working with. Here are a few Raimondi slant ridge trowels that can work for you:

Raimondi 1.4 inch (6 mm) Slant Ridge Trowel

The ridges on this 1.4 inch slant trowel overlap and collapse to provide better adhesive coverage on the back of the tile. It is highly efficient in floor heating systems and removes air pockets to ensure a better transfer of heat to the flooring.

Raimondi 5/16 inch (8 mm) Slant Ridge Trowel

For slightly larger tile sizes, this 5/16 inch slant ridge trowel is also effective at ensuring superior adhesive coverage and removes air pockets.

Raimondi 3/8 inch (10 mm) Slant Ridge Trowel

This 3/8 inch slant ridge trowel increases the efficiency in floor heating systems by removing air bubbles that inhibit heat transfer to the flooring. It also provides superior adhesive coverage on the back of the tile compared to a standard notched trowel.

Raimondi Tools for Air Removal

It is essential to remove any air bubbles that may remain below the tile slab after it is installed. If any air remains under the surface, it will create a vacuum that will make the slabs more prone to breakage. A tight, air-free seal is required for proper tile installation, and to achieve this, hand tile beaters are highly effective. Here are a few Raimondi tile laying vibrator options to help you.

Raimondi Lupetto Vibrator for Laying Tiles 110V

Using a high vibration frequency of 8200 rounds/min. this tile laying vibrator helps to eliminate air pockets under the slabs and secure a full bond between the tile and mortar. It also includes an ergonomic handle for comfort during installation.

Raimondi 110 Volt Volpino Vibrator

This tile laying vibrator is designed to vibrate large format tile surfaces and allow air pockets to escape from between the adhesive and the tile. This ensures a complete connection to the mud bed and thus prevents cracks.

Raimondi 5.75 inch x 13.75 inch Rubber Tile Beater

This particular rubber tile beater operates like the other options; however, it has a rubber bottom which prevents tile slabs from damage during use. It is especially beneficial for thin large-format tile slab installation, or applications that require a gentler touch.

Raimondi Large Slab Alignment Device

Accosting or aligning slabs is another step every professional tile installer takes to ensure a high-quality project. Once the tile is placed on the adhesive, it is very difficult to slide the tile closer to the adjacent slab. To resolve this issue and close in the gap, a special device is required to pull the tiles closer together mechanically. This device is known as a closer or slab alignment device. Consider this slab alignment device by Raimondi:

Raimondi Closer Device to Align Large Slabs

This closer device is very effective at tightening the gap between large tile slaps. Proper alignment is key, especially when working with large format tiles. The tool operates by getting a suction grip of both tiles, and turning the knob to slide the two tiles together.

Raimondi Tile Levelling Tools

A tiling project cannot be optimally aesthetic or functional without proper levelling. By using Raimondi tile levelling tools, you can ensure the slabs are perfectly level with each other. These levelling systems will ensure the tiles are on the same horizontal line and set well into the adhesive.

Raimondi Levelling Spacers RLS Classic Clip 500 pieces

These tile levelling spacers are designed to properly set flexible, large format, heavy or thin tiles. They help to align tiles and speed up the tile setting process, even on an uneven foundation.

Raimondi RLS Pliers for Floor Spacers

These manual pliers are ideal for adjusting any tile wedge. They squeeze the tile wedge forward into the spacer for a tight bond between tiles.

Raimondi RLS Wedges 500 Pieces with Bucket

Tile wedges make it easier to set tiles faster, and they ensure each one is levelled properly. Uneven tile installations can be an issue, especially when the foundation is uneven, but with these wedges, spacers, and pliers, you can ensure the floor will be perfectly level between each tile.

Visit Centura Tools for Professional Tiling Equipment

If you are looking for the right equipment from trusted brands for your tile installation project, Centura Tools has all you need. We offer professional tiling equipment from the best brands around the world, and we will order special items if you need them. When you visit our web site you can access equipment by manufacturer or tool type, for a straightforward and user-friendly shopping experience. We would like to be your source for professional tiling equipment and advice, and our professionals are ready to help you make the best decisions for your installation goals. Contact us at (416) 785-3311 for more information.